Model NO.: LPG-100
Material Status: Power, Solution, Cream, Strap, Bulk
Flow: Contra-Flow
Type: Centrifugal Spray
for Drying Liquid Into Powders: Drying Liquid Material to Be Granules
Chemical Products Drying: for Milk Powder Manufacturing
Trademark: SYQ
Specification: GMP
HS Code: 84339090
Heating Mode: Transmission
Atomization: Gas Atomization
Heat Source: Electricity, Steam, Coal Gas, Natural Gas, Fuel
Spraying Equipment for Chemical Industry:
Spray Dryer for Pharmaceutical Manufacturing
Aloe Powder
Dryer: Herb Material Dryer
for Pesticide Drying: for The Drying of Cosmetics
Transport Package: Strong Export Packaging
Origin: Shanghai
GMP Standard Made of SUS304
Stainless Steel.Spray Dryers are relatively simple in operation which accept feed in fluid state and convert it into a dried particulate form by spraying the fluid into a hot drying medium.
Food atomization is done using high pressure nozzle, high pressure air, two fluid nozzles or centrifugal disc atomiser. The heating of drying air can be of either steam coils or thermic fluid or air heater according to the service conditions available. The hot air is distributed into the chamber from top by an air dispenser.
The final product is taken out from the spray dryer along with air to a cyclone separator for fines separation and the final powder gets collected at the bottom. Additional systems like fines recycling into the chamber for agglomeration, powder cooling, conveying, storage & bagging can also be supplied.
Application:
Milk Powder
Ceramic Slurry
Molasses
Enzymes
Calcium Chloride
Herbal Extracts
Ice Cream Mix Powder
Whey Powder
Polyvinyl Acetate
Poly Aluminum Chloride
Effluent Concentrates
Instant Coffee
Bakers Yeast
Fruit Juice Powder
Egg Powder
Dyes
Instant Tea
Magnesium Chloride
UF Resin
Protein Hydrolysates
Catalysts
Instant Chicory etc
item\parameter\spec | LPG |
5 | 25 | 50 | 100 | 150 | 200-2000 |
inlet temperature | 140-350 automatically controlled |
outlet temerature | ~80-90 |
Max.water evaporation capacity | 5 | 25 | 50 | 100 | 150 | 200-2000 |
centrifugal spraying nozzle transmission mode | compressed air transmission | Mechanical transmission |
Rotation speed rpm | 25000 | 18000 | 18000 | 18000 | 15000 | 8000-15000 |
sprayingdesc diameter mm | 50 | 100 | 120 | 140 | 150 | 180-340 |
Heat supply | Electricity | Electricity+steam | Electricity+steam,fuel oil and gas | Settled by users themselves |
Max.Electric heating power kw | 9 | 36 | 63 | 81 | 99 | |
overall dimensions m | 1.8×0.93 ×2.2 | 3×2.7 ×4.26 | 3.7×3.2 ×5.1 | 4.6×4.2 ×6 | 5.5×4.5 ×7 | Depends on the concrete conditions |
Dried powder restoring tate % | ≥95 | ≥95 | ≥95 | ≥95 | ≥95 | ≥95 |
Note:For the water evaporation capacity, material property,the inlet and outlet tempratures,please refer the following diagram for reference |
Contact us if you need more details on
Drying Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Dryer、Spray Dryer. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Drying Machines